By default, the configuration of the CS X51 controls and LEDs are preset to certain values. The following tables detail the default settings are for each control on the CS X51.
| Name | MIDI Channel | Control ID | Range Min | Range Max | Range Invert |
|---|---|---|---|---|---|
| Knob 1 | 1 | 4 | 0 | 127 | OFF |
| Knob 2 | 1 | 3 | 0 | 127 | OFF |
| Knob 3 | 1 | 2 | 0 | 127 | OFF |
| Knob 4 | 1 | 8 | 0 | 127 | OFF |
| Knob 5 | 1 | 7 | 0 | 127 | OFF |
| Knob 6 | 1 | 6 | 0 | 127 | OFF |
| Knob 7 | 1 | 12 | 0 | 127 | OFF |
| Knob 8 | 1 | 11 | 0 | 127 | OFF |
| Knob 9 | 1 | 10 | 0 | 127 | OFF |
| Knob 10 | 1 | 16 | 0 | 127 | OFF |
| Knob 11 | 1 | 15 | 0 | 127 | OFF |
| Knob 12 | 1 | 14 | 0 | 127 | OFF |
| Knob 13 | 1 | 20 | 0 | 127 | OFF |
| Knob 14 | 1 | 19 | 0 | 127 | OFF |
| Knob 15 | 1 | 18 | 0 | 127 | OFF |
| Knob 16 | 1 | 24 | 0 | 127 | OFF |
| Knob 17 | 1 | 23 | 0 | 127 | OFF |
| Knob 18 | 1 | 22 | 0 | 127 | OFF |
| Knob 19 | 1 | 29 | 0 | 127 | OFF |
| Knob 20 | 1 | 28 | 0 | 127 | OFF |
| Knob 21 | 1 | 27 | 0 | 127 | OFF |
| Knob 22 | 1 | 26 | 0 | 127 | OFF |
| Knob 23 | 1 | 25 | 0 | 127 | OFF |
| Knob 24 | 1 | 34 | 0 | 127 | OFF |
| Knob 25 | 1 | 33 | 0 | 127 | OFF |
| Knob 26 | 1 | 32 | 0 | 127 | OFF |
| Knob 27 | 1 | 31 | 0 | 127 | OFF |
| Knob 28 | 1 | 30 | 0 | 127 | OFF |
| Name | MIDI Channel | Control ID | Range Min | Range Max | Range Invert |
|---|---|---|---|---|---|
| Slider 1 | 1 | 1 | 0 | 127 | OFF |
| Slider 2 | 1 | 5 | 0 | 127 | OFF |
| Slider 3 | 1 | 9 | 0 | 127 | OFF |
| Slider 4 | 1 | 13 | 0 | 127 | OFF |
| Slider 5 | 1 | 17 | 0 | 127 | OFF |
| Slider 6 | 1 | 21 | 0 | 127 | OFF |
| Cross Fader | 1 | 35 | 0 | 127 | OFF |
| Name | MIDI Channel | Message Type | Toggle | Control ID | Range Min | Range Max |
|---|---|---|---|---|---|---|
| Button 1 | 1 | NOTE | OFF | 60 | 0 | 127 |
| Button 2 | 1 | NOTE | OFF | 61 | 0 | 127 |
| Button 3 | 1 | NOTE | OFF | 62 | 0 | 127 |
| Button 4 | 1 | NOTE | OFF | 63 | 0 | 127 |
| Button 5 | 1 | NOTE | OFF | 64 | 0 | 127 |
| Button 6 | 1 | NOTE | OFF | 65 | 0 | 127 |
| Button 7 | 1 | NOTE | OFF | 66 | 0 | 127 |
| Button 8 | 1 | NOTE | OFF | 67 | 0 | 127 |
| Button 9 | 1 | NOTE | OFF | 68 | 0 | 127 |
| Button 10 | 1 | NOTE | OFF | 69 | 0 | 127 |
| Button 11 | 1 | NOTE | OFF | 70 | 0 | 127 |
| Button 12 | 1 | NOTE | OFF | 71 | 0 | 127 |
| Button 13 | 1 | NOTE | OFF | 72 | 0 | 127 |
| Button 14 | 1 | NOTE | OFF | 73 | 0 | 127 |
| Button 15 | 1 | NOTE | OFF | 74 | 0 | 127 |
| Button 16 | 1 | NOTE | OFF | 75 | 0 | 127 |
| Button 17 | 1 | NOTE | OFF | 76 | 0 | 127 |
| Button 18 | 1 | NOTE | OFF | 77 | 0 | 127 |
| Button 19 | 1 | NOTE | OFF | 78 | 0 | 127 |
| Button 20 | 1 | NOTE | OFF | 79 | 0 | 127 |
| Button 21 | 1 | NOTE | OFF | 80 | 0 | 127 |
| Button 22 | 1 | NOTE | OFF | 81 | 0 | 127 |
| Button 23 | 1 | NOTE | OFF | 82 | 0 | 127 |
| Button 24 | 1 | NOTE | OFF | 83 | 0 | 127 |
| Name | MIDI Channel | Message Type | Ableton Mode | Control ID |
|---|---|---|---|---|
| LED 1 | 1 | NOTE | OFF | 60 |
| LED 2 | 1 | NOTE | OFF | 61 |
| LED 3 | 1 | NOTE | OFF | 62 |
| LED 4 | 1 | NOTE | OFF | 63 |
| LED 5 | 1 | NOTE | OFF | 64 |
| LED 6 | 1 | NOTE | OFF | 65 |
| LED 7 | 1 | NOTE | OFF | 66 |
| LED 8 | 1 | NOTE | OFF | 67 |
| LED 9 | 1 | NOTE | OFF | 68 |
| LED 10 | 1 | NOTE | OFF | 69 |
| LED 11 | 1 | NOTE | OFF | 70 |
| LED 12 | 1 | NOTE | OFF | 71 |
| LED 13 | 1 | NOTE | OFF | 72 |
| LED 14 | 1 | NOTE | OFF | 73 |
| LED 15 | 1 | NOTE | OFF | 74 |
| LED 16 | 1 | NOTE | OFF | 75 |
| LED 17 | 1 | NOTE | OFF | 76 |
| LED 18 | 1 | NOTE | OFF | 77 |
| LED 19 | 1 | NOTE | OFF | 78 |
| LED 20 | 1 | NOTE | OFF | 79 |
| LED 21 | 1 | NOTE | OFF | 80 |
| LED 22 | 1 | NOTE | OFF | 81 |
| LED 23 | 1 | NOTE | OFF | 82 |
| LED 24 | 1 | NOTE | OFF | 83 |
You can always revert back to this default configuration by doing a “Factory Reset”. There are two methods of doing this:
1. With the CS X51 powered off, press and hold the top left and bottom right keypad buttons. While still holding these, power up the device. If the factory reset has been successful, the LEDs will show a quick wipe pattern.
2. Run the Machinewerks Editor, connect the CS X51 and click the Factory Reset button.
